|Shipping options||Free via Economy shipping (1 to 10 business days) to United States|
|Paypal,Bank Transfer,Cash on Delivery|
TECHNICAL FEATURES OF PREFABRICATED BUILDINGS
|EARTHQUAKE CONDITIONS||(1st degree earthquake zone) effective ground acceleration coefficient: A0=0,4|
|CLIMATE CONDITIONS||Production is made based on 3rd climate zone|
|SNOW LOAD VALUE||75 Kg/m2|
|WIND SPEED VALUE||80 km/h (Must be fixed to the ground)|
|EXTERIOR WALL INSULATION COEFFICIENT||K: 0.45 Kcal/m²hC ( K: 0,53 W/m² K )|
|INTERNAL WALL INSULATION COEFFICIENT||K: 0.44 Kcal/m²hC ( K: 0,51 W/m² K )|
|LIGHT STEEL MATERIAL||Erdemir 1311 ,(ST-37 ) Standard DIN EN 10147-00, zinc plated galvanized steel structure is used.|
|CEMENT BOARD||Density: ~ 1300 kg / m³ flame retardant (B1 to DIN 4102 Part 1)Thermal conductivity coefficient (λ10 ˚ C dry)|
|EPS (Expanded Polystyrene Foam)||TS EN 13163|
|CHASSIS LOAD CAPACITY||200 kg/m² (for two-storey buildings) (Calculated according toT.S 498 e.)|
|ROOF INSULATION COEFFICIENT||K: 0.39 Kcal/m²hC ( K: 0,43 W/m² K )|
INTERIOR AND EXTERIOR PANELS
|The outer and inner panels are manufactured of 8X1250X2500 mm two-sided cement board. 84mm 12 density polystyrene rigid foam in used between cement baords for insulation. Outer panel thickness is 10 cm and inner panels are 6 cm an the panel height is 250 cm. The heaviest wall panel among the full panel, window panel, door panel, transom panel from which prefabricated houses are made (125x250 cm exterior door panel) is 114 kg.|
|As joining elements special U and H galvanized steel profiles are used that are bent and combined by means of special connection system. Rust will not occur as a result of sweating because of the curved edges.|
|Roof trusses, beams and columns are made of special shaped galvanized steel profiles. Along the building every 1250 mm a special shaped steel truss is placed and on top of truss a special shaped galvanized steel purlin is mounted. Bolts and nuts are used in assembly so that building can be reassembled many times. Production is being done in our modern production facilities with seamless and bold connection system.|
|The mezzanine construction carrier frame is made of special shaped galvanized steel profiles. The mezzanine floor is covered with 16mm cement board (cement-bonded particle board). On the ground floor suspended ceiling an 80 mm thickness (14 kg/m³) layer of glass wool is placed for sound and heat insulation. The mezzanine load is 200 kg/m²|
|ROOF SYSTEM||Sloping value for gable roof and pitched roof systems is 30%|
|ROOF COVERING AND INSULATION||Over the metal purlin, painted trapezoidal steel sheets are placed as roof covering.Optionanally tile pattern painted trapezoidal sheets can be applied. Gable end covering is PVC paneling. Overhangs are 20 cm.Wide galvanized steel sheet shaped fringes with vents are used. For the roof special shaped galvanized steel sheet in diagonal shape are being used. PVC made square shape rain gutters and cylindrical downspouts with mounted accessories are used. Rain gutters and its accessories can be made of steel sheet upon request.|
|For ceiling covering 12 mm gypsum boards are used. For ceiling insulation above the suspended ceiling gypsum board, 80 mm glass wool is laid. Below the combining roof chassis, omega profiles that are made of galvanized steel are fastened. Rust will not occur as reasult of sweating that occurs on steel sheet edges because of curved shape. PVC cover is used on ceiling Omega profiles to give them aesthetical look. Gypsum boards joining elements are made of electrostatic painted aluminium material. For wet places cement board is used as ceiling covering.|
|EXT.DOOR||90x200 cm Steel door with metal frame. For external doors a special cylindrical, first class, TSE certified locks are used.|
|INT.DOOR||Interior doors: 80x200 sizes, galvanized steel frame, off-white wooden American door. Aluminum and PVC doors are also optional. TSE certified built-in locks are in use.|
|WINDOW||120X100, 120x160 cm and 60x40 cm (transom window) of PVC-based materials and TSE certified and also 60 series. (Optionally frames made out of cement board can be applied around windows and transoms).|
|DOUBLE GLAZING||All glass used for windows is 4 + 16 + 4 double glazed, and for transom frosted glass is used.|
|When order is placed all doors and windows dimensions must be mentioned.|
|Produced from galvanized steel profiles ,that are specially shaped by rollform machines. Stairs are assembled using seamless screw system. Steps are covered with wood and risers are open. Handrails are manufactured from decorative wrought iron. Metal parts are painted with electrostatic paint.Optionally the stairs can be produced completely from wood.|
|EXTERIOR PAINTING||External metal parts are painted double layer coating and with double layer synthetic oil paint. External cement boards panels surfaces are painted with acrylic paint. For external wall mastic is applied on the jointing areas. TSE certified painting products are used in our buildings.|
|INTERIOR PAINTING||The interior cement board surfaces and ceiling gypsum boards are painted with plastic paint. TSE certified painting products are used in our buildings.|
|OTHER||The galvanized cold formed trusses, purlin and panel frames are not coated as they are produced by means of seamless technology.|
|INSTALLATIONS||Electric installation is applied over plaster using TSE certified cables.|
|CABLES||Installation is applied over plaster and can be flush mounted optionally.|
|FUSES||TSE certified fuses are used.|
|LIGHTING FIXTURES||TSE certified materials are used.|
|SWITCH & SOCKET||TSE certified switch and sockets are used.|
|OUTER CONNECTION||Electric meter, ground rods and outdoor connections are responsability of the buyer.|
|INSTALLATION||Installation is applied over plaster and can be flush mounted optionally.|
|SANITARY WARE||TSE certified materials are used.|
|TAP AND SHOWER EQUIPMENT||TSE certified materials are used.|
|PIPES||Clean water pipes are made of PPRC and waste water pipes are made of PVC and all materials are TSE certified.|
|OUTER CONNECTION||Water meter and outer connections are responsability of the buyer.|
FOUNDATION AND CONCRETE
Concrete slab (foundation) should be done according to the concrete plan (basic dimensions) provided by as prefab. Concrete slab and soil survey are responsabilites of the customer.The building is fixed to the ground with anchors and steel dowels. Anchored raft or steel wire mesh foundation should be prepared. The customer is responsible for all excavation operations.
As prefab constructions start with reasonable prices and vary from plasterboards, european paper coverings to fireplaces. We have a lot of options related to roofing. According to our customers request, the roof of your prefabricated house can be made as deciduous, kiremetal, painted galvanized, polished or polished. The laying of special insulation materials between the roofs can be done by using glass fiber reinforced polyester (polystyrene foam), glass face (izocan) sandavic panel side stone wool materials. In our constructions, the sobal system can be heated very comfortably and comfortably by heating, natural gas and electric heaters. If desired, a fireplace can be made. Our customers make turn-key prefabricated structures including laminar parquet, tiles, kalebodur, natural gas installation, heating installation which are related works to the sub-floor and sub-floor. Our prices vary according to customer demand. We can turn a prefabricated building into a wooden-looking house. In our Kumburgaz showroom you can also see our different large-scale kumburgaz façade, which has been transformed into a villa-look by using the cover coating technology. Contact us to find out where we are closest to you. We are establishing in a short period of time with our new generation technology that we pride ourselves on projects such as house, office, construction site, dining hall, dormitory, school, factory, hospital, hangar, cafeteria. We can build turnkey prefabricated buildings if our customers wish. Our company, which is making our prefabricated houses in a very short time suitable for 4 seasons conditions and can survive as depression resistant, provides service with professional staff to all the factories and districts of Turkey, neighborhoods and villages in order to meet the needs of the house.
What are AS Prefab Steel House Advantages?
Homogeneous, isotropic, durable and least human construction systems are among the least. It allows error-free and undamaged production. 365 days a year, allows for sustainable construction management in all weather conditions, short-term and dry manufacturing at the plant and site. System elements provide lifetime protection against corrosion by galvanizing method. Design offers a wide choice of materials, flexibility and aesthetics. Interior user without arm, without beam. Offers the opportunity to use the net space.
Design and production are suitable for all national and international specifications. Electric and mechanical installations in an as prefab steel home system are considered during design. Prior to production, the holes in the wall dikings and floor beams to be installed by the installation are determined and opened during production. Crushing, pouring and repairing operations are not required as in conventional systems. This protects the contractor during construction from additional costs during use. The user offers high building physics possibilities. (Gypsum boards and cement-based coatings provide the required fire protection conditions) Thermal insulation is designed according to the climatic conditions of each zone and is applied with appropriate material selection.The heat insulation performance is also high in this area.
It is reported by the American Iron and Steel Association that the steel is 90% recyclable and is certified by the International Environmental Management Systems. According to the American Lung Association, thanks to the materials used, the building system is obtained from spaces with healthy indoor air quality. For each project, special static calculations are made, which determine the maximum openings and floor heights to which the result can be passed. There is no problem in supplying the materials used in the system on national and international conditions. The interest in the system, which has been widely used in America for 50 years and met with Turkey after the 1999 earthquake, has been increasing day by day in the Gulf countries, especially in the emirates like Dubai and Abu Dhabi which have recently started to build.
Structures are under the warranty of our company for 1 year against errors arising from manufacturing and workmanship.
cheap prefabricated building,prefab homes, prefabricated home,zillow for sale,mobile homes for sale,tiny house,modular homes,manufactured homes,tiny homes for sale
1357ft² Cheap Prefabricated Building
- Product Code: AP126
- Availability: In Stock
- Including Tax: $10,920.00
The fact that the structures are manufactured in a short time and providing fast assembly increases the preference for prefabricated structures. The production of structures, for example, of the 250 m2 building takes a maximum of 5 days. A team of 4 can assemble an average of 50 square meters of building daily.
Tags: cheap prefabricated building, prefab homes, prefabricated home, zillow for sale, mobile homes for sale, tiny house, modular homes, manufactured homes, tiny homes for sale